夏季是一個多雨的季節，面對這種天氣，很多人都擔心自己停在戶外的愛車是否。那么，夏季小汽車停車棚需要注意些什么問題才能使你的愛車安然無恙呢？下面濟南停車棚廠家為您分析：

Summer is a rainy season. In the face of this weather, many people are worried about the safety of their cars parked outdoors. So, what problems should you pay attention to in the car parking shed in summer to keep your car safe? The manufacturer of Jinan parking shed will analyze for you:

一、車棚不能過于簡易

1、 The car shed should not be too simple

夏季來臨全國各地都開始下雨了，對車棚是一種考驗?，F(xiàn)在流行的車棚設計美觀，但在設計時是否考慮到雨雪天氣后對車棚的載荷是否計算在內。因為很多簡易車棚并未考慮到這些因素?？赡軐е码[患。因此，大家在搭建車棚時一定要選擇強度高的材料。

Summer is coming. It's raining all over the country. It's a test for the car shed. Now the popular car shed design is beautiful, but whether the load on the car shed after rain and snow weather is considered in the design. Because many simple car sheds do not take these factors into account. May cause safety hazards. Therefore, we must choose materials with high strength when building the shed.

二、平時保養是關鍵

2、 Routine maintenance is the key

注意在自己使用或是公共場所停車或停放時要先看看車棚，看車棚是否有變型，生銹或其它可能有隱患的存在。如有隱患的要及時排除。

When parking or parking in your own use or public places, you should first look at the shed to see if there is any deformation, rust or other potential safety hazards in the shed. If there are hidden dangers, they should be eliminated in time.

三、車棚的搭建地點要慎重

3、 The construction site of the car shed should be careful

車主盡量不要使用一些低洼的場地搭建車棚（相信大家都知道這個道理），搭建車棚好適當?shù)奶钔猎炫_，形成坡度。這樣可以有效排水和防止洪水浸沒你的愛車。

Car owners should try not to use some low-lying sites to build car sheds (I believe everyone knows this truth), and build car sheds with proper soil filling to form a slope. This can effectively drain water and prevent flooding of your car.

此外要注意一些事項，比如：

In addition, pay attention to some matters, such as:

車棚如果產生積水或積雪，就必須要立即積水和積雪，如果雨雪天氣持續不斷，積水會讓膜材破壞，要對公眾關閉膜面覆蓋的空間，并立即采取措施避免新積水。

If there is accumulated water or snow in the car shed, it is necessary to immediately remove the accumulated water and snow. If the rainy and snowy weather continues, the accumulated water will damage the membrane. The space covered by the membrane should be closed to the public, and immediate measures should be taken to avoid new accumulated water.

對金屬連接件應采用可靠的防腐蝕措施，必須要考慮節點構造偏心對拉索、膜材產生的影響，施加預張力的方式、結構安裝允許偏差，以及進行二次張拉的可能性。

Reliable anti-corrosion measures shall be taken for metal connectors. The influence of node structure eccentricity on cable and membrane materials, the way of applying pretension, the allowable deviation of structure installation, and the possibility of secondary tensioning must be considered.

為了減少生銹對膜表面的影響，分別選擇有銹跡的膜表面，并在生銹的延伸處設置停車棚的固定。在膜的邊緣處，考慮到拉力的受力點，并且需要適當?shù)丶訌姀埩δさ倪吘墶?/div>